Service process: telephone quotation → scheduled disassembly and assembly time and place → field service → air conditioning disassembly → air conditioning assembly → cost settlement;
Service features: professional workers, skilled technology, rapid disassembly;
Service advantages: professional disassembly.
Common sense of air conditioner
1. Determine the installation position. Consider layout and convection to avoid installation where noise and vibration may occur.
2. The pipeline connection should be accurate and in place. The stability of the pipeline and the effect of air conditioning are essential.
3. The installation surface of air conditioner shall be firm and firm with sufficient bearing capacity.
4. The outdoor unit of air conditioner shall not be adjacent to the external doors and windows and green plants.
Air conditioning transfer steps:
I. preliminary preparation: the staff will dismantle the door and bring the kit and security equipment.
2. Recover refrigerant. First, start cooling. After the external machine is running, close the small valve with fluorine gas. After frosting, close the large valve and close it immediately.
Unplug the power supply and tighten the security cap. Let the air conditioner move the refrigerant in the machine to the outdoor unit.
3. Remove the indoor unit. When removing the indoor unit, please prevent condensate from flowing into the circuit board.
4. Remove the outdoor unit. When disassembling the outdoor unit, pay attention to balance to avoid vibration and shaking. It's wrapped up in plastic and treated.
5. Installation. When re installing the air conditioner, pay attention to the installation position and convection. Then, check the leakage with cleaning agent, observe whether there are bubbles in each joint, and confirm that the system has no leakage, and tighten the valve safety cap.
6. Check. Then, the air in the pipe and the internal machine are removed. Debugging and installation are completed.